SCI-tive 500 Workstation

Product Image:

Specifications:

  • Workstation Dimensions:

  • 1720(w) x 750(h) x 720(d) mm

  • Workspace Dimensions:

  • 800(w) x 480(h) x 500(d) mm

  • Capacity:

  • Maximum: 610 plates
  • Interlock: 100 plates

  • Other:

  • Standard Cycle: 210 seconds
  • Weight: 140 Kg
  • Dimensions: 277(w) x 266(h) x 295(d) mm

  • Atmosphere Control:

  • Temperature 20oC - 45oC
  • Humidity 40% - 80%
  • O2 Control 0.0% - 20.9%
  • CO2 Control 0.0% - 30.0%
  • Automatic Humidity Control

Product Features

The SCI-tive 500 workstation is controlled by Gas Mixer Q, (Ruskinn’s latest and most advanced gas mixing system), which is supplied 'off board'. The Gas Mixer Q controls the workstation to allow:

  • Cells to be examined under precise O2 and CO2 tension
  • Changing O2 and CO2 tensions to be programmed over time
  • Control of temperature and humidity within the workstation
  • Monitoring, tracking and calibration without altering the internal conditions
  • Aids compliance with EU Tissues and Cells Directive (2004/23/EU)
  • Large working area
  • Valuable laboratory space to be created as there is a reduced need for other gas controlled incubators and Class 2 biological safety cabinets

Features and Benefits

  • 3.5 minutes Interlock Cycle Time for rapid transfer of up to 100 plates
  • Automatic interlock outer door operation for simple front loading access
  • Minimum / Maximum Incubation Temperature - ambient +5oC to 45oC
  • Up to 4 Gas Operation; H2/N2, CO2, N2, Air for low gas consumption and running costs
  • Workstation Fabrication is solvent bonded acrylic for optimum cell conditions

Standard Accessories

  • Energy Saving Fluorescent Lamp for perfect illumination
  • Foot Operated High Intensity Halogen Lamp for close inspection of samples
  • Automated Humidity Control for optimum cell conditions
  • Gas Low Alarms to alert operator of gas requirements
  • Excess Gas Use Alarm to alert operator of gas requirements
  • Ezee SleevesTM port entry system for quick bare hand access
  • Detox for optimum workstation environment
  • 10 Petri Dish Holders for colour coded plate storage
  • 2 wire Rack for storage of up to 30 plates
  • Removable Front for easy loading and cleaning
  • Internal Mains Socket for powering small accessories
  • Single Plate Entry System to allow the direct introduction of individual plates with out the interlock cycle

Optional Accessories

  • Ultrasonic Humidity Control for improved cell conditions
  • Cable Gland Port to allow the passage of cables through the workstation wall without altering internal conditions
  • Vacuum Line Port to allow the attachment of a vacuum line used to remove waste media from plates without removing them from the anaerobic conditions inside the workstation
  • Stand to store workstation where bench space is not available
  • Data Logging Connection allows the user to monitor the temperature of the workstation via a PC